|
|
 |
The Acura® electro offers shape, balance and working ergonomics resembling those of a manual instrument. But comfort is so greatly improved that pipetting and result consistency are just outstanding. |
| |
 |
|
|
 |
Surf through mode selection by pressing a single button.
Forward mode
Aspiration and pipetting of set volume. Suitable for all applications.
Reverse mode
Aspiration in excess, followed by dosing of set volume. Enhances reproducibility below 20 µL.
Especially recommended for viscous and foaming liquids.
Stepper mode
Tip filling and step-by-step distribution. Best suited to aliquot samples.
Dilution mode
Aspiration of 2 or 3 different volumes for restitution in one shot. An easy way to dilute samples.
Tactile mode
“Start and stop” liquid measurement, titration and gel loading by simple touch of activation button.
Mixing
“Up and down” liquid flow in the tip / vial. |
| |
|
|
|
 |
A simple double click gives access to the number of pipetting cycles performed since last zeroing. |
| |
|
|
|
 |
Sound can be turned on/off anytime. |
| |
|
|
|
 |
Display converts instantly to right or left side reading. All information clearly presented and visible at a glance during programming, pipetting and calibration steps. |
| |
|
|
|
 |
Located on the front side, speed selector allows swift change even during the pipetting process. In addition, slow speed access at any time by gentle touch of start button. |
| |
|
|
|
 |
One control unit fits a choice of 27 volumetric assemblies available separately. This greatly extends working possibilities and makes electronic pipetting affordable to all budgets. Disassembling and re-assembling without any tool contributes towards maximal flexibility.
Calibration specificities of extra modules - as set by factory QC or by pipette owner - are retained in instrument memory. |
| |
|
|
|
 |
ENERGY STAR®
Qualified power supply for a better environment
RoHS
Restriction of Hazardous Substances |
| |
|
|
|
 |
NiMH battery pack exchangeable instantly. Fast battery charging (< 1.5 hours) and extended working autonomy (> 3000 consecutive pipetting cycles). Battery charge level clearly visible on display. Automatic energy saving stand-by when unused. |
| |
|
|
|
 |
Maximal efficiency obtained with a large surface, ergonomically located ejector button. The shaft height adjustment system called JustipTM (4 mm span) - controlled by efficient click-stops - allows a wide selection of tips to tightly fit the nozzle.
The multichannel bowed shape ejector head permits effortless, sequential tip ejection. |
| |
|
|
|
 |
Pipette charging stand
Stand allows charging and storing up to three electronic pipettes or battery packs simultaneously. Each position is fitted with a red/green charging LED. One stand supplied with every initial package.
Battery charging rack
Space saving stand holds up to three battery packs simultaneously. The ideal charging and storage accessory for spare batteries, available at any time. |
| |
|
|
|
 |
Pipette construction limits maintenance to a minimum - no tool required to remove volumetric module. The pipetting cycle counter facilitates maintenance monitoring. Whenever sterilisation is needed, volumetric modules can be autoclaved at 121°C / 250°F. |
| |
|
|
|
 |
Control software gives immediate access to calibration menu. Performance check possible over two or three independent volumes (Vmin, Vmid and Vmax). New settings entered directly from the keyboard.
Error message warns of any inaccurate plunger movement. |
| |
|
|
|
 |
Each instrument bears its own serial number and passes strict performance control attested by an individual QC certificate. |
| |
|
